Cabling for Initial Installation of Third-party Applications

Once you have installed an operating system, you can connect to the OSN server in order to install and configure your third-party application (e.g., IP PBX). For this you can connect to the OSN server using the following local connectivity methods:

■

USB and HDMI ports connected to computer peripherals, as described in Cabling for Installing Operating System.

■

Serial port for serial communication between a PC and the OSN server, as described below.

➢

To connect the serial interface:

1.

Connect a serial cable with a micro-USB connector on one end, to the serial port (labeled IOIOI) on the OSN4 module.

2.

Connect the other end of the cable to the COM port on your computer.

Cabling OSN4 Module for Serial Communication

3.

Establish serial communication with the OSN server through a terminal emulation program (such as HyperTerminal), using the following serial communication settings:

●

Baud Rate: 115200 (bits per second)

●

Data Bits: 8

●

Parity: None

●

Stop Bits: 1

●

Flow Control: None